www.boser.com.tw industrial power supply dc-dc 14.44 0.4 15.24 3.8 3.3 8.38 1.4 6.85 0.765 6.85 transformer e 0v 24v use #6-32 screw protrusion limits 2.5mm x4 0.25 screw system chassis 3.87 1.5 3.1 1.5 14.14 0.55 6.78 0.8 6.78 0.8 output +5v gnd +12v -12v pin 1~3 4~7 8~9 10 -5v n/c 11 12 output voltage +5v +12v -12v min. load 0a 0a 0a rated load 10a 2a 0.5a max. load 12a 3a ---- tolerance +/-0.05v +/-0.6v +/-0.6v -5v 0a 0.5a ---- +/-0.75v BPW-8410 80w 48v dc-dc open frame power supply input range: 36~72vdc *input voltage: 36~72vdc *input current: 5a at 48vdc max. *inrush current: < 10a at 48vdc input from a cold start 25 o c excluding emi suppression capactiors *load range: with all other outputs within their accuracy ranges and all output at 60% rated load, the +5v output is between 4.95~5.05v. max. load can not exceed 80w convection cooling and 100w forced air cooling *ripple and noise: peak to peak ripple and noise for +5v is < 50mv, and < 100mv for the other outputs at rated load, nominal line *line regulation: < +/-1% for each output at rated load and +/-10% of input voltage variables *load regulation: < +/-1% for +5v, and < +/-5% for -12v, +12v, -5v while changing measured output load from +/-40% to 60% rated load and keeping other outputs at 60% rated load *efficiency: > 70% at dc24v and rated load *altitude: > 10,000 feet *protection: built-in over voltage protection circuit. trip point of crowbar circuit is between 5.7~7v. hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed *temperature: 0~+50 o c (operating); -40~+85 o c (storage) *connectors: dc input: terminal blocks dc output: molex 5273-12a *dimensions: 15.24 x 8.38 x 3.8 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes features features *safety: ul 1950 / csa 22.2 no.234 / vde en60950 *emi: fcc class b / en55022 b *ems: level 3 of iec-802, 803, 804 safety standards safety standards
|